Όλες οι Κατηγορίες
electric utility poles
90 Βρέθηκαν αντικείμενα
13.8 KV 25FT 1.0 παράγοντας ασφάλειας Πολωνού ηλεκτρικής δύναμης με την πίσσα
13.8 KV 25FT 1.0 Electrical Power Pole Safety Factor with Bitumen Milky Way fabricates a variety of poles for the utility industry. These steel poles are designed and tested to ensure bend resistance, load capacity, and height all meet the requirements for the application of the tower. Anchored and/or direct embed styles available. General Notes: Manufacturer drawings available for all poles Poles can be modified to any configuration Transmission and distribution arms
γαλβανισμένος Columniform χάλυβας Πολωνός, ταχύτητα ανέμου 160 Km/Hour 30 μ το /s 11.8m
11.8m Steel Electrical Power Pole Steel Power Pole Electric Power Pole Columniform Specifications: Type Straight Pole ,Tensile Pole ,Turn Pole Suit for Electricity distribution Shape Conoid ,Multi-pyramidal , Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Tolerance of dimension +- 2% Power 10 KV ~550 KV
1250 Dan 11.8M 8 πλευρές Ηλεκτρικός στύλος ισχύος 4mm πάχος άμεση ταφή ASTM A123 Galvanization Standard
1250 Dan 17M 8 Sides Electrical Power Pole 4mm Thickness Direct Burial ASTM A123 Galvanization Standard Milky Way fabricates a variety of poles for the utility industry. These steel poles are designed and tested to ensure bend resistance, load capacity, and height all meet the requirements for the application of the tower. Anchored and/or direct embed styles available. General Notes: Manufacturer drawings available for all poles Poles can be modified to any configuration
11M Κωνικός ηλεκτρικός στύλος ισχύος με χωρητικότητα φόρτωσης 50KN και πάχος 5 mm στο πρότυπο γαλβανισμού ASTM A123
11M Conical Electrical Power Pole with 50KN Load Capacity and 5mm Thickness in ASTM A123 Galvanization Standard Milky Way fabricates a variety of poles for the utility industry. These steel poles are designed and tested to ensure bend resistance, load capacity, and height all meet the requirements for the application of the tower. Anchored and/or direct embed styles available. General Notes: Manufacturer drawings available for all poles Poles can be modified to any configurat
8M ηλεκτρική δύναμη Πολωνός επιστρώματος σκονών για τη γραμμή διανομής και μετάδοσης
8M powder coating Electrical Power Pole for distribution and transmission line Flexibility, ease of installation, maintenance free, reliability . These are just some of the advantages provided by our galvanized steel monopoles over concrete or lattice structures. We design, manufacture and supply any tapered steel poles for Transmission networks. Quick Description Electrical Transmission and distribution pole For Electrical transmission and distribution structures Round or
ηλεκτρική δύναμη Πολωνός polygonal ή υψηλής τάσης conicla για τη γραμμή μετάδοσης
polygonal or conicla high voltage Electrical Power Pole for transmission line Specifications: Type Straight Pole ,Tensile Pole ,Turn Pole Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Lamp power 20 W- 400 W (HPS/MH) 220V (+-10%) /50Hz Torlance
γαλβανισμένος πόλος ηλεκτρικής δύναμης καυτής εμβύθισης 13m Q345 για την ηλεκτρική γραμμή
13m Q345 hot dip galvanized electrical power pole for electrical line COST ----- Install cost The electrical part was designed can be installed within 6 minutes by using the non-screw connector, which definitely reduce your installation time and create lot of savings on the labor cost. The arm was designed can be connected with the pole by two arc fixing plate with two long screws. The new solar panel bracket was composed by sleeve, angle iron and U-steel fixed by screw, It
πόλος ηλεκτρικής δύναμης πίσσας 14m Αφρική για τη μετάδοση δύναμης
14m africa bitumen electrical power pole for power transmission All the pole could be custormized as per the custormer's request. 1.material :Q235/SS400 Steel 2.Galvanized,thickness>=80um 3.Polygonal/conical 4.Weld penetration>=60% material thickness 5: Stainless pothook for easy installation and maintenance. 1. Designed for various kinds of street lighting poles with different heights according to the BSS729 and EN standards. 2. Material: Steel Q235,Q345,SS400 3. Hot dip
Gr65 πόλος 2.75mm ηλεκτρικής δύναμης τύπων φλαντζών για 69kv τη μετάδοση δύναμης
Gr65 Flange type electric power pole 2.75mm for 69kv power transmission Steel Poles has advantages such as light weight, good appearance and small space occupation. Recently, the steel pole (monopole) has been widely used in the city and town power grid construction, and communication. The steel poles (monopoles) are widely used in both domestic and foreign market. They has been exported to UAE, Philippines, and any other countries. General Notes: Manufacturer drawings
