Όλες οι Κατηγορίες
power distribution poles
90 Βρέθηκαν αντικείμενα
διανομή δύναμης 90ft 100ft 110ft Πολωνοί με Galvaniztion
Specifications 1. Protecion class: IP65 2. Light source: 100W-400W high-pressure sodium lamp 3. Rated voltage and frequency: 220V(±10%)/50Hz 4. Caliber: 60mm 5. Protecting class against eletric shock: Type I 6. Lamp in die-cast aluminum, coated with powder polyes ter after anti-corrosive treatment 7. A lamp body with a built-ray lens 8. Fasteners screws, all stainless steel 9. Applicable height: 6m-12m (according to customers' requirment) 10. Working environment:-35°C--+55°C
κατηγορία 3 γαλβανισμένο D1.1 μέταλλο Πολωνός 11M Πολωνών AWS μετάδοσης δύναμης της Αφρικής
11M Class 3 Africa galvanized power distribution pole AWS D1.1 Material: minimum yield strength is 345Mpa Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base
Ο κύκλος εκλέπτυνε τη γαλβανισμένη μετάδοση δύναμης χάλυβα Πολωνοί/ηλεκτρική δύναμη Πολωνός
Round Tapered Galvanised Steel Power Transmission Poles For Electrical Power Transmission Lines Power Distribution Poles are required especially in populated areas where these poles are favoured because they require less space than lattice towers and are more acceptable visually. Weighing of the steel made Power Distribution poles is approximately 50-70% less than comparable wood structures, the steel poles are easier and less expensive to handle and install.Design of the
Χρησιμότητα Πολωνών μετάδοσης δύναμης χάλυβα S500MC 12m γαλβανισμένη για τη διανομή δύναμης
S500MC 12m Galvanized Steel Pole Utility Line For Power Distribution Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement
γαλβανισμένος 5KN χάλυβας Πολωνός 8m/γαλβανισμένος χάλυβας Πολωνοί για τη γραμμή διανομής δύναμης
8m 5KN Galvanized Steel Pole For Power Distribution Line Exported To Africa Specification: 1) Steel materials conform to ASTM A36 with Q235(S235,SS400),Q345(S355JR), Q460,etc 2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.The welders have got corresponding certificate after testing and inspection. 3) Finish: Hot-dip galvanized in accordance with ASTM A123. 4) Pole Height: All available 5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,
Μετάδοση Πολωνοί ηλεκτρικής δύναμης χάλυβα για το πρόγραμμα γραμμών διανομής ηλεκτρικής ενέργειας
Electrical Power Transmission Poles For Electricity Distribution Line Project Company Information Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV
μετάδοση Πολωνοί ηλεκτρικής δύναμης χάλυβα δύναμης 24.5M για το πρόγραμμα γραμμών διανομής ηλεκτρικής ενέργειας
24.5M Power Steel Electrical Power Transmission Poles For Electricity Distribution Line Project Company Information Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from Pakstan
Μετάδοση Πολωνοί ηλεκτρικής δύναμης για το πρόγραμμα γραμμών διανομής, δύναμη Πολωνός χάλυβα
Electrical Power Transmission Poles For Distribution Line Project Specification Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement
Ηλεκτρική μετάδοση δύναμης ιστών υψηλής τάσης Πολωνοί για το πρόγραμμα γραμμών διανομής ηλεκτρικής ενέργειας
High Voltage Steel Electrical Mast Power Transmission Poles For Electricity Distribution Line Project Company Information Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port . Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on. We have plenty of export experience . Since our first overseas order from
